Make sure you have the following information before setting up the p rinter on a wireless network:
SSID—The SSID is also referred to as the network name.
Wireless Mode (or Network Mode)—The mode is either infrastructure or ad hoc.
Channel (for ad hoc networks)—The channel defaults to automatic for infrastructure networks.
Some ad hoc networks will also require the automatic setting. Check with your system support person if you are
not sure which channel to select.
Security Method—There are three basic options for Security Method:
WEP key
If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key
currently in use on the network by selecting the default WEP transmit key.
or
WPA or WPA2 preshared key or passphrase
WPA includes encryption as an additional layer of security. The c hoices are AES or TKIP. Encryption must be set
for the same type on the router and on the printer, or the printer will not be able to communicate on the
network.
802.1X–RADIUS
If you are installing the printer on an 802.1X network, then you may need the following:
Authentication type
Inner authentication type
802.1X user name and password
Certificates
No security
If your wireless network does not use any type of security, then you will not have any security information.
Note: Using an unsecured wireless network is not recommend ed.
Notes:
If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility
of the computer network adapter, and then look for the network name. If you cannot find the SSID or the
security information for your network, then see the documentatio n that came with the access point, or contact
your system support person.
To find the WPA/WPA2 preshared key/passphrase for the wireless network, see the documentation that came
with the access point, see the Web page associated with the access poi nt, or consult your system support
person.
Connecting the printer to a wireless network using Wi-Fi Protected Setup (WPS)
Before you begin, make sure that:
The access point (wireless router) is WPS certified.
A wireless network adapter is installed in the printer and is working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
Additional printer setup 38