Troubleshooting

181

Maintenance kit very low [80.xy]

You may need to order a maintenance kit very soon. For more information, contact technical support or your Dell

printer dealer, and then report the message. If necessary, press on the printer control panel to clear the message and continue printing.

Memory full [38]

Try one or more of the following:

From the printer control panel, press to clear the message.

Decrease the resolution setting.

Install additional printer memory.

Network [x] software error [54]

Try one or more of the following:

From the printer control panel, press to clear the message and continue printing.

Unplug the router, then wait for 30 seconds, and then plug it back again.

Turn off the printer, wait for about 10 seconds, and then turn the printer back on.

Update the network firmware in the printer or the print server. For more information, contact your system support person.

NonDell [supply type], see User’s Guide [33.xy]

Note: The supply type can be toner cartridge or imaging unit.

The printer has detected a nonDell supply or part installed in the printer.

Your Dell printer is designed to function best with genuine Dell supplies and parts. Use of third-party supplies or parts may affect the performance, reliability, or life of the printer and its imaging components.

All life indicators are designed to function with Dell supplies and parts and may deliver unpredictable results if third- party supplies or parts are used. Imaging component usage beyond the intended life may damage your Dell printer or associated components.

Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts may not be covered by the warranty.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer,

press and simultaneously for 15 seconds to clear the message and continue printing.

If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then install a genuine Dell supply or part.

Note: For the list of supported supplies, see the “Ordering supplies” section of the User's Guide or visit http://support.dell.com.

Page 181
Image 181
Dell B5460DN manual Maintenance kit very low 80.xy, Memory full, Network x software error, Troubleshooting 181