Dell B5460DN manual Understanding printer menus 110

Understanding printer menus		110
	Use	To
	Timeouts	Set the printer to operate at a low power state.
	Hibernate Timeout	Notes:
	Disabled
		• When the Hibernate Timeout timer expires, the printer uses
	1 hour
		Ethernet connection to check the value of “Hibernate
	2 hours
		Timeout on Connection.”
	3 hours
		• If “Hibernate Timeout on Connection” is set to “Do Not
	6 hours
		Hibernate,” then the printer never automatically hibernates.
	1 day
		• If “Hibernate Timeout on Connection” is set to “Hibernate,”
	2 days
		then the printer follows the Hibernate Timeout value, except
	3 days
		when it is set to Disabled.
	1 week	• Disabled is the factory default setting except for European
	2 weeks
		Union countries, Canada, and Switzerland.
	1 month	• “3 days” is the factory default setting for European Union
		countries, Canada, and Switzerland.
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning the display to a ready state.
	15–300 sec	Note: “30 sec” is the factory default setting.
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255 sec	Notes:
		• “90 sec” is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the printer checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535 sec	• “40 sec” is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation. This setting has no effect on PCL
		emulation print jobs.
	Timeouts	Set the amount of time the printer waits for user intervention
	Job Hold Timeout	before it holds jobs that require unavailable resources and
	5–255 sec	continues to print other jobs in the print queue.
		Notes:
		• “30 sec” is the factory default setting.
		• This menu appears only when a printer hard disk is installed.