Check Thermostat Operation, Troubleshooting

5.To enable partial keypad lockout (only the tem- perature buttons will function; all other buttons will be disabled and will not operate until configuration is changed):

ON									Switch #1 (see steps 1-2)
									Switch #2 (see step 3)
									Switch #3 (see step 4)
1 2 3 4									Switch #4 ON

Switch #4 in ON position disables all buttons except

and (see OPERATION GUIDE).

NOTE

The battery maintains the stored program in the event of a power failure. When attached to the wall with 24 VAC power applied, the thermostat will function normally with- out the battery. However, the program will be lost in the event of power interruption or failure if the battery is not installed. When power is restored, the thermostat will automatically maintain a temperature of 64°F or a cooling temperature of 82°F (factory preprogrammed) as needed.

CHECK THERMOSTAT OPERATION

Fan Operation

1.Turn on power to the system. If the heat source has a standing pilot, be sure to light it.

2.	Press	FAN	until FAN ON is displayed. The blower
		SWITCH
	should begin to operate.
3.	Press	FAN	until FAN AUTO is displayed. The
		SWITCH

blower should stop operating within approximately one minute.

Heating System Operation

1. Press	SYSTEM	until HEAT is displayed (it may already
	SWITCH

be displayed).

2.Press to adjust thermostat to 99°F. All stages of the heating system should begin to operate within five minutes.

Cooling System Operation

!CAUTION

To prevent compressor and/or property damage, if power to the compressor has been off or interrupted for more than 1 hour and the outdoor temperature is below 50°F, DO NOT operate the system for at least the amount of time the compres- sor was off! This will allow the compressor heaters to warm the compressor oils to avoid damage due to slugging.

1. Press	SYSTEM	until COOL is displayed.
	SWITCH

2.Press to adjust the thermostat to 40°F. All stages of the cooling system should come on within five minutes (if the compressor is not operating, it may be locked out. See LOCKOUT BYPASS OPTION).

Refer to the OPERATION GUIDE if you need additional information on thermostat operation.

TROUBLESHOOTING

Refer to the Question & Answer section of the OPERA- TION GUIDE for information on troubleshooting the thermostat.

LOCKOUT BYPASS OPTION

!CAUTION

FOR QUALIFIED SERVICE TECHNI- CIANS’ USE ONLY. OPERATORS SHOULD NOT USE THIS FEATURE DUE TO POSSIBILITY OF EQUIPMENT OR PROPERTY DAMAGE, OR PERSONAL INJURY.

DO NOT USE THE LOCKOUT BYPASS OPTION UNLESS THE COMPRESSOR OIL HEATERS HAVE BEEN OPERATIONAL FOR 6 HOURS AND THE SYSTEM HAS NOT BEEN OPERATIONAL FOR AT LEAST 5 MINUTES.

COMPRESSOR SHORT TERM

CYCLE PROTECTION

This thermostat has a built-in short term (5-minute) time delay. During this 5-minute period, the thermo- stat will lock out the compressor to allow head pres- sure to stabilize. If you want to override this feature

while testing thermostat operation, simply press TEMPVIEW

and PRGMVIEW buttons at the same time at initial start-up.

1F95-71 specifications

The White Rodgers 1F95-71 is a versatile, programmable thermostat designed to provide effective temperature regulation for residential heating and cooling systems. This thermostat stands out for its user-friendly interface and a range of advanced features that cater to the needs of modern homeowners seeking energy efficiency and comfort.

One of the key features of the White Rodgers 1F95-71 is its 7-day programming capability. Users can set different temperature schedules for each day of the week, allowing for maximum customization. This is particularly beneficial for households with varying schedules, as it provides the ability to tailor heating and cooling patterns according to the occupants' routines. The programmable settings can be accessed easily through its intuitive touchscreen interface, simplifying the user experience.

Another significant characteristic of the 1F95-71 thermostat is its Smart Recovery feature. This technology enables the thermostat to learn how long it takes to heat or cool a space to the desired temperature, ensuring that it starts the heating or cooling process early enough so that the desired temperature is achieved by the scheduled time. This not only enhances comfort but also improves energy efficiency by minimizing unnecessary energy consumption.

In addition to its programming capabilities, the White Rodgers 1F95-71 is equipped with a large, easy-to-read display. The clear screen makes it simple to monitor and adjust settings, even from a distance. For further convenience, the thermostat also supports features such as an auto-changeover function, which automatically switches between heating and cooling modes based on the current temperature and user preferences.

To promote energy conservation, the 1F95-71 includes an intelligent energy-saving system. It offers options such as a vacation hold mode, which allows users to set a specific temperature while they are away, preventing wasted energy on heating or cooling an empty home. This feature can significantly reduce energy bills while ensuring that the home remains comfortable upon return.

Compatibility is another strong point of the White Rodgers 1F95-71. It works with a wide variety of heating and cooling systems, making it a suitable choice for many homes. The thermostat is designed to work with gas, electric, heat pump, and multi-stage systems, making it a flexible option for modern HVAC setups.

In conclusion, the White Rodgers 1F95-71 is a highly functional and user-friendly programmable thermostat that combines advanced technology with energy-saving features. Its intuitive interface, 7-day programming, Smart Recovery, and compatibility with various heating and cooling systems make it an excellent choice for any homeowner looking to improve their comfort while reducing energy costs.

White Rodgers 1F95-71 Check Thermostat Operation, Troubleshooting, Fan Operation

Models: 1F95-71