Dell B5460DN Not enough free space in flash memory for resources [52], PPDS font error [50], Paper changes needed, Parallel port [x] disabled [56]

Not enough free space in flash memory for resources [52]
Try one or more of the following:
•From the printer control panel, press to clear the message and continue printing.
•Delete fonts, macros, and other data stored in the flash memor y.
From the printer control panel, navigate to:
> Settings > > Settings > > Print Settings > > Utilities Menu > > Format Flash > >
Yes >
•Use a larger‑capacity flash memory card.
Note: Downloaded fonts and macros that are not stored in the flash memory are deleted when the printer is turned
off or restarted.
PPDS font error [50]
Try one or more of the following:
•From the printer control panel, press to clear the message and continue printing.
•If the printer cannot find the requested font, then navigate to:
> Settings > > Setti ngs > Print Settings > > PPDS menu > > Best Fit > > On >
The printer finds a similar font and reformats the affect ed text.
•Cancel the current print job.
Paper changes needed
Try one or more of the following:
•From the printer control panel, select Prompt for ea ch page to continue printing.
•Select Use current supplies to continue printing using the paper loaded in the tray.
•Cancel the current print job.
Parallel port [x] disabled [56]
Do either of the following:
•From the printer control panel, select Continue to clear the messa ge and continue printing.
The printer discards any data received through the parallel po rt.
•Select Reset active bin to reset the bin for a li nked set of bins.
Troubleshooting 182