3Holding the card by its sides, align the plastic pins (1) on the card with the holes (2) on the controller board.
1
2
4Push the card firmly into place as shown in the illustration.
Warning—Potential Damage: Improper installation of the card may cause damage to the card and the
controller board.
Note: The entire length of the connector on the card must touch and be flushed against the controlle r board.
5Close the controller board access door.
Note: When the printer software and any hardware options are installed, it may be necessary to manu ally add
the options in the printer driver to make them available for print jobs. For more information, see “Updating
available options in the printer driver” on page 35.
Additional printer setup 24