Dell B5460DN manual Disk must be formatted for use in this device, Empty the hole punch box

Troubleshooting 175

Disk must be formatted for use in this device

From the printer control panel, select Format disk to format the printer hard disk and clear the message. Note: Formatting deletes all the files stored in the printer hard disk.

Disk near full. Securely clearing disk space.

Try one or more of the following:

•From the printer control panel, press to clear the message.

•Delete fonts, macros, and other data stored in the printer hard disk.

•Install a printer hard disk with higher capacity.

Empty the hole punch box

1Empty the hole punch box.

For more information, see the “Cleaning the printer” section of the User’s Guide.

2Reinsert the hole punch box into the finisher, and then presson the printer control panel to clear the message.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Imaging unit low [84.xy]

You may need to order an imaging unit. If necessary, press to clear the message and continue printing.

Imaging unit nearly low [84.xy]

If necessary, press on the printer control panel to clear the message and continue printing.

Imaging unit very low [84.xy]

You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the User’s Guide.

If necessary, press to clear the message and continue printing.