Using the Push Button Configuration (PBC) method
1From the printer control panel, navigate to:
> Settings > >Network/Ports > > Network [x] > > Network [x] Setup > > Wireless > >
WiFi Protected Setup > > Start Push Butt on Method >
2Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1From the printer control panel, navigate to:
> Settings > >Network/Ports > > Network [x] > Wireless > > WiFi Protected Setup > >
Start PIN Method >
2Copy the eightdigit WPS PIN.
3Open a Web browser, and then type the IP address of your access po int in the address bar.
Notes:
The IP address appears as four sets of numbers separated by pe riods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correc tly.
4Access the WPS settings.
5Enter the eightdigit PIN, and then save the setting.
Connecting the printer to a wireless network using the Embedded Web Server
Before you begin, make sure that:
Your printer is connected temporarily to an Ethernet network.
A wireless network adapter is installed in your printer and working properly. Fo r more information, see the
instruction sheet that came with your wireless network adapter.
1Open a Web browser, and then type the printer IP address in t he address field.
Notes:
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such a s 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correc tly.
2Click Settings > Network/Ports > Wireless.
3Modify the settings to match the settings of your access point (wireless router).
Note: Make sure to enter the correct SSID.
4Click Submit.
Additional printer setup 39