Loading paper and specialty media

58

Hold transparencies by the edges. Flex and fan the transparencies to loosen them. Straighten the edges on a level surface.

Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.

Flex and fan the stack of envelopes to loosen them. Straighten the edges on a level surface.

5Load the paper or specialty media.

Note: Slide the stack gently into the multipurpose feeder until it comes to a stop.

Load only one size and type of paper or specialty media at a time.

Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled.

There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.

Without an optional staple finisher

With an optional staple finisher

Onesided printing

Onesided printing

 

Twosided printing

Twosided printing

Page 58
Image 58
Dell B5460DN manual Two ‑sided printing