Using Hibernate mode
Hibernate is an ultralowpower operating mode. When operating in Hibernate mo de, all other systems and devices
are powered down safely.
Notes:
Make sure to wake the printer from Hibernate mode before sendi ng a print job. A hard reset or a long press of
the Sleep button wakes the printer from Hibernate mode.
If the printer is in Hibernate mode, then the Embedded Web Server is disabled.
Using the Embedded Web Server
1Open a Web browser, and then type the printer IP address in t he address field.
Notes:
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such a s 123.123.123.123.
If your are using a proxy server, then temporarily disable it to load the Web page correctly.
2Click Settings > General Settings > Sleep Button Settings.
3From the “Press Sleep Button” or “Press and Hold Sleep Button” dropdown menu, select Hibernate.
4Click Submit.
Using the printer control panel
1From the printer control panel, navigate to:
> Settings > > Settings > > General Settings >
2Press the arrow buttons until Press Sleep Bu tton or Press and Hold Sleep But ton appears, and
then press .
3Press the arrow buttons until Hibernate appears, and then press .
Notes:
When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to Hibernate
mode.
When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the printer to
Hibernate mode.
Adjusting the brightness of the printer display
To save energy, or if you have trouble reading the display, adjust its bright ness settings.
Using the Embedded Web Server
1Open a Web browser, and then type the printer IP address in t he address field.
Saving money and the environment 131