11 Connect the ISP solution interface cable into the receptacl e of the controller board.
Note: The plugs and receptacles are color-coded.
Installing an optional card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, t hen turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have other devices attached to the printer, then turn them
off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch a metal surface on the printer before touching any cont roller board electronic components or connectors.
1Access the controller board.
For more information, see “Accessing the controller boa rd” on page 14.
2Unpack the optional card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
Additional printer setup 23