Dell B5460DN manual Understanding printer menus 111, Error Recovery, Print Recovery

Understanding printer menus		111
	Use	To
	Error Recovery	Set the printer to restart when an error is encountered.
	Auto Reboot	Notes:
	Reboot when idle
		• “Reboot always” is the factory default setting for Auto
	Reboot always
		Reboot.
	Reboot never
		• 5 is the factory default setting for Max Auto Reboots.
	Max Auto Reboots
		• If the printer performs the same number of automatic
	1–20
		reboots that is set in the printer within a certain amount of
		time, then the printer shows the applicable error instead of
		rebooting.
	Error Recovery	Set the number of automatic reboots that the printer can perform.
	Max Auto Reboots	Notes:
	1–20
		• 5 is the factory default setting.
		• If the printer performs a number of automatic reboots that is
		the same as the menu setting within a certain amount of
		time, then the printer displays the applicable error instead of
		rebooting.
	Print Recovery	Let the printer automatically continue printing from certain offline
	Auto Continue	situations when these are not resolved within the specified time
	Disabled	period.
	5–255	Note: Disabled is the factory default setting.
	Print Recovery	Specify whether the printer reprints jammed pages.
	Jam Recovery	Notes:
	On
		• Auto is the factory default setting. The printer reprints
	Off
		jammed pages unless the memory required to hold the
	Auto
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.
	Print Recovery	Set the printer to check for jammed paper automatically.
	Jam Assist	Note: On is the factory default setting.
	On
	Off
	Print Recovery	Let the printer successfully print a page that may not have printed
	Page Protect	otherwise.
	Off	Notes:
	On	• Off is the factory default setting. Off prints a partial page
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.