Dell B5460DN manual Checking the status of parts and supplies, Emptying the hole punch box

Maintaining the printer 138

Emptying the hole punch box

1Pull out the hole punch box.

2Empty the container.

3Insert the emptied hole punch box back into the finisher until it clicks into place.

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is required.

Checking the status of parts and supplies on the printer control panel

From the printer control panel, navigate to:

> Status/Supplies > View Supplies >

Checking the status of parts and supplies from the Embedded Web Server

Note: Make sure the computer and printer are connected to the same network.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Device Status > More Details.