6Tighten the screws on the controller board shield.
7Reattach the controller board access cover.
2
1
Installing a memory card
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, t hen turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any ot her devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch something metal on the printer first before touching any controller board electronic components or
connectors.
Additional printer setup 17