Maintaining the printer

147

If the printer does not have a caster base but is configured with optional trays, then remove the trays.

Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.

Use the handholds located on both sides of the printer to lift it.

Make sure your fingers are not under the printer when you set it down.

Make sure there is adequate clearance around the printer.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.

Page 147
Image 147
Dell B5460DN manual