Dell B5460DN Additional printer setup, Installing internal options, Available internal options

Additional printer setup 14

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and then unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

Note: Some options are available only in select printer models. For more information, contact the place where you purchased your printer.

•Memory card

–DDR3 DIMM

–Flash memory

•Fonts

•Firmware cards

–Forms barcode

–PRESCRIBE

–IPDS

–Printcryption

•Printer hard disk

•Internal Solutions Ports (ISP)

Accessing the controller board

Note: This task requires a flathead screwdriver.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1Remove the controller board access cover.

1

2