An optional memory card can be purchased separately and attached to the controller board.
1Access the controller board.
For more information, see “Accessing the controller boa rd” on page 14.
2Unpack the memory card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may
cause damage.
3Align the notch (1) on the memory card with the ridge (2) on the connector.
1
2
4Push the memory card straight into the connector, and then push t he card toward the controller board wall until
it clicks into place.
5Reattach the controller board shield, and then the controlle r board access cover.
Additional printer setup 18