Carrier Access none manual Router ospf, Remote-admin web

Global Configuration Mode

Global Configuration Commands

remote-admin web

Use the remote-admin web command to allow remote administration via Web-management. To deny Web remote access, see no remote-admin web command on page 4-48.

CAUTION! ALLOWING REMOTE ADMINISTRATION IS A SECURITY RISK.

Syntax: (config)# remote-admin web {primary-port secondary-portprimary-secure-portsecondary-secure-port} [port] enable

Field	Definition
primary-port	Primary HTTP port, default port 80
secondary-port	Secondary HTTP port, default port 8080
primary-secure-	Primary HTTPS port, default port 443
port
secondary-secure-	Secondary HTTPS port, default port 8443
port
port	Enter a specific port to change from default ports listed above.

Example: (config)# remote-admin web primary-port enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

router ospf

Use the router ospf command to allow access to the Router OSPF global configuration commands. See Chapter 16, Configuration - OSPF Mode for commands in this mode. For the no counterpart of this command, see no router ospf command on page 4-48.

Syntax: (config)# router ospf

Example: (config)# router ospf (config-router-ospf)#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-56 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI