5.Working with the Instrument
Key/setting dial | semiautomatic sectioning mode | automatic sectioning mode |
|
|
|
| The blade feed rate can be adjusted | ditto |
1 | from 0.01 – 1.5 mm/s: |
|
|
| |
| 0.01 – 0.1 in 0.01 mmm/s increments, |
|
| 0.10 – 0.5 in 0.02 mmm/s increments, |
|
| 0.50 – 1.5 in 0.10 mmm/s increments. |
|
1 | Adjusting the amplitude from | ditto |
0 – 3 mm in 0.05 mm increments |
| |
|
|
1 | Not possible. | Setting the section thickness for |
|
| automatic mode – max. 1000μm. |
Display for the current specimen ditto holder position (lowest position =
0μm, uppermost position = 20,000μm.) You can reset the display to zero at any point using the CLEAR/∑μm key. The section thicknesses are then added in the ∑μm display.
24 | Operating Manual V1.1 – 05/2007 |
