Attachments on dovetail receptacle | Leica Leica VT1200 instruction

3. Instrument Characteristics

Attachments on dovetail receptacle

Ice bath

Buffer tray

Buffer tray, plastic

Buffer tray, metal

Specimen plate for specimens of 1cm in height

for specimens of 2cm in height

Directional

Cyanoacrylate adhesive

Double-walled buffer tray			VibroCheck

Minichiller (circulating cooler)

Specimen plate for specimens of 1cm in height

for specimens of	Fig. 9
2cm in height
	Blades for the blade holder
Directional	Razor blade
Directional
	Injector blade
Cyanoacrylate
adhesive
	Sapphire blade

Leica VT1200 and VT1200S – Microtome

11

Image 11

Leica Leica VT1200S manual Attachments on dovetail receptacle, Blades for the blade holder

Contents

Leica VT1200 Leica VT1200S Page Nussloch Germany Contents Qualification of Personnel Symbols in the Text and their MeaningsImportant Notes Intended Use/Improper Use General Safety Notes Safety Proper handling Transport, Unpacking and Setting up Electrical data Instrument CharacteristicsTechnical Data for the VT1200 Ambient conditions Instrument CharacteristicsTechnical Data for the VT1200S Dimensions Microscope General Overview of the VT1200/VT1200S Blades for the blade holder Attachments on dovetail receptacle LED for feed rate VT1200 Control Panel Window edge is set Moves the specimen Upwards as long as 1 VT1200S Control Panel Standard Scope of Delivery for the VT1200 Installation 91200S001 Standard Scope of Delivery for the VT1200S0481 Packing the instrument Packing and Setting up the Instrument Before Commissioning the Instrument Description of the Typical Application Working with the Instrument Moving the Specimen Receptacle Vertically Control Elements on the VT1200 Control Panel Blade Forward back Blade Method Starts the sectioning process Selecting the Sectioning Parameters Selected amplitude Ampl Saved section thickness LED illumination is switched onControl Element on the Control Panel of the VT1200S Blade feed rate Speed Mode Toggling from MAN to An audible warning signal soundsWhen these keys are pressed Toggling from Auto Mm in 0.05 mm increments Not possible Adjusting the amplitude fromKey/setting dial Automatic mode max μm Working with the Instrument Blade forward and Blade Ward key and press 2nd cutting Key lights upWard key. Press the 1st cutting Window edge key until the LED Process Μm display is then reset to Automatic section thickness Or 100μm by max μm using rotary knobUsing predefined step sizes 1 With rotary knob 1. If continuous MAN with rotary knob 1 forStroke type CUT only single Stroke Single can be selected 5 mm/s in 0.5 mm/s increments Installing the Ice Bath and Buffer Tray Installing the Accessories Preparing a Specimen Installing the Double-walled Buffer Tray Installing and Removing the Blade Holder Now return the blade holder to the cutting position Inserting the Blade Adjusting the Clearance Angle Working with the Instrument Operating the VibroCheck Using the VibroCheck with the VT1200 Normal operating status is now restored Using the VibroCheck with the VT1200S Operating the VibroCheck Harm the instrument Malfunctions Meanings and TroubleshootingError Messages and Troubleshooting Error/INF No Troubleshooting Remark Reached C2 have different Software updatedInF Panel and keyboard Blade Dirty. CleanDown during installa VibroCheck VibroCheck was Collides with Instrument is Plug connections are Blocked when RUN is activeNot accepted Negative values Values of more than 1000μm Replacing the Main Fuse Clean using an alcohol-based solution or acetone Cleaning and MaintenanceCleaning the Instrument Display Buffer traySpecimen plate Blade Buffer Tray Extension Accessories for Standard Specimens Lid for covering the buffer tray Specimen Plate VibroCheck Magnifier, Complete Blades Microscope, Complete Installing the Magnifier Support or Microscope Support 240 V, 50/60 Hz Fiber-optic Illumination, Cold Light Source230-240 V, 50/60 Hz Voltage variant 230V/50/60Hz Leica VT1200/VT1200S Microtome with vibrating blade EC Declaration of Conformity Warranty Warranty and Service Operating Manual V1.1 05/2007