Standard Scope of Delivery for the VT1200S | Leica Leica VT1200

4.	Installation

4.1.1 Standard Scope of Delivery for the VT1200S
VT1200S basic instrument	0481 42066
1 control panel	0481 43396
1 toolset:
- 1 Allen key, size 3.0	0194 04764
- 1 Allen key, size 6.0	0222 04141
- 1 cryo-manipulator	0462 28930
- 1 replacement fuse T 1A	6943 01000
1 set of power cables:
- 1 power cable "D"	0411 13558
- 1 power cable "USA-C-J"	0411 13559
- 1 power cable "UK" ST/BU F-5A	0411 27822
1 dust cover (basic instrument), small	0212 43742
1 bottle of cyanoacrylate adhesive, contents 10 gr	0371 27414
1 Operating Manual for Leica VT1200/VT1200S	0702 37107
VT1200S configuration	91200S001
The above scope of delivery,
plus:
Ice bath, complete	0481 42010
Buffer tray, (metal) complete	0481 42084
VT blades (10x10 Gillette)	0205 42056

When ordering additional accessories, compare the parts received with the parts ordered. If the parts received do not match your order, contact the sales company responsible for your order imme- diately.

Leica VT1200 and VT1200S – Microtome

15

Image 15

Leica Leica VT1200S manual Standard Scope of Delivery for the VT1200S, 0481, 91200S001

Contents

Leica VT1200 Leica VT1200S Page Nussloch Germany Contents Qualification of Personnel Symbols in the Text and their MeaningsImportant Notes Intended Use/Improper Use General Safety Notes Safety Proper handling Transport, Unpacking and Setting up Instrument Characteristics Technical Data for the VT1200Electrical data Ambient conditions Instrument CharacteristicsTechnical Data for the VT1200S Dimensions Microscope General Overview of the VT1200/VT1200S Blades for the blade holder Attachments on dovetail receptacle LED for feed rate VT1200 Control Panel Window edge is set Moves the specimen Upwards as long as 1 VT1200S Control Panel Standard Scope of Delivery for the VT1200 Installation Standard Scope of Delivery for the VT1200S 048191200S001 Packing the instrument Packing and Setting up the Instrument Before Commissioning the Instrument Description of the Typical Application Working with the Instrument Moving the Specimen Receptacle Vertically Control Elements on the VT1200 Control Panel Blade Forward back Blade Method Starts the sectioning process Selecting the Sectioning Parameters Selected amplitude Ampl Saved section thickness LED illumination is switched onControl Element on the Control Panel of the VT1200S Blade feed rate Speed Mode Toggling from MAN to An audible warning signal soundsWhen these keys are pressed Toggling from Auto Mm in 0.05 mm increments Not possible Adjusting the amplitude fromKey/setting dial Automatic mode max μm Working with the Instrument Blade forward and Blade Ward key and press 2nd cutting Key lights upWard key. Press the 1st cutting Window edge key until the LED Process Μm display is then reset to Or 100μm by max μm using rotary knob Using predefined step sizes 1Automatic section thickness With rotary knob 1. If continuous MAN with rotary knob 1 forStroke type CUT only single Stroke Single can be selected 5 mm/s in 0.5 mm/s increments Installing the Ice Bath and Buffer Tray Installing the Accessories Preparing a Specimen Installing the Double-walled Buffer Tray Installing and Removing the Blade Holder Now return the blade holder to the cutting position Inserting the Blade Adjusting the Clearance Angle Working with the Instrument Operating the VibroCheck Using the VibroCheck with the VT1200 Normal operating status is now restored Using the VibroCheck with the VT1200S Operating the VibroCheck Harm the instrument Malfunctions Meanings and TroubleshootingError Messages and Troubleshooting Error/INF No Troubleshooting Remark Reached C2 have different Software updatedInF Panel and keyboard Blade Dirty. CleanDown during installa VibroCheck VibroCheck was Collides with Blocked when RUN is active Not accepted Negative values Values of more than 1000μmInstrument is Plug connections are Replacing the Main Fuse Cleaning and Maintenance Cleaning the InstrumentClean using an alcohol-based solution or acetone Display Buffer traySpecimen plate Blade Buffer Tray Extension Accessories for Standard Specimens Lid for covering the buffer tray Specimen Plate VibroCheck Magnifier, Complete Blades Microscope, Complete Installing the Magnifier Support or Microscope Support Fiber-optic Illumination, Cold Light Source 230-240 V, 50/60 Hz240 V, 50/60 Hz Voltage variant 230V/50/60Hz Leica VT1200/VT1200S Microtome with vibrating blade EC Declaration of Conformity Warranty Warranty and Service Operating Manual V1.1 05/2007