9.Ordering Information for Optional Accessories, Consumables and Spare Parts
9.1.7 Installing the Magnifier Support or Microscope Support
3
a
4
Fig. 48
•First, remove the cover (3) from the basic in- strument and store it in a safe place.
•Insert the provided Allen screws (a) into the hole (4) in the bearing bush. Use the size 3 Allen key to screw the screws into the open slot on the top side of the basic instrument.
•Push the magnifier support or microscope support into the bearing bush as far as it will go.
•Adjust the magnifier to the desired inclination angle and screw in the screw (2) using the size 3 Allen key.
- Insert the S6 stereozoom micro- scope into the ring holder and attach it by screwing it down.
2
Fig. 49
Fig. 50
Leica VT1200 and VT1200S – Microtome | 53 |
