| 5. | Working with the Instrument |
|
|
|
Key/setting dial | semiautomatic sectioning mode | automatic sectioning mode |
|
|
|
| ➞ Rotary knob 2 | ditto |
1 | The feed rate (FOR/REV) for the |
|
| "Blade forward" and the "Blade |
|
| back" keys can be set between 1 |
|
2 | and 5 mm/s in 0.5 mm/s increments |
|
|
| |
| with rotary knob 1. |
|
|
|
|
1 | ➞ Rotary knob 2 | ditto |
Switches the vibration movement |
| |
|
| |
| (FOR/VIB) of the "Blade forward" |
|
| key either on or off using rotary |
|
2 | knob 1. |
|
|
|
|
|
| ditto |
1 | ➞ Rotary knob 2 |
|
| Key acknowledgment (BEEP) on or |
|
| off with rotary knob 1. |
|
2 |
|
|
|
|
|
| Save the parameter and leave by | ditto |
| pressing the menu MENU key. |
|
Leaving the menu and saving the parameter is possible at any point in the menu.
If you want to call up the parameters of a certain user (for example, user 3), press the Menu key and select user 3. Then confirm by pressing the Menu key 2x. The parameters stored under user3 are now enabled.
Leica VT1200 and VT1200S – Microtome | 31 |
