Carrier Access none manual Show licenses, Firewall, Pri, Sip, System

User Mode

show licenses

Use the show licenses command to display all enabled feature keys.

Syntax:	> show licenses
Example: Adit 3500> show licenses
VPN	license = No
SIP	license = Yes
MGCP	license = No
G729A	license = Yes

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

show log

Use the show log command to display the current events on the system.

Syntax: > show log {firewallprisipsystemt1 portlcc number}

{severity}

Field	Definition
firewall	Filter firewall alarms
pri	Display PRI logs. Note: This is not supported on the Adit 3104.
sip	Display SIP logs.
system	Filter general system alarms
t1 port	Display event log for a specific T1 port.
	Adit 3104: Value must be 1.
	Adit 3500: Range = 1-4.
lcc number	Display event log for a specific Link Cross-Connect (LCC).
	MSR: Range = 1-8.
severity	alert - Filter alert alarms (threshold crossing)
	all - Display all alarms
	critical - Filter critical alarms (service affecting)
	info - Filter informational alarms
	major - Filter major alarms (service affecting)
	minor - Filter minor alarms (non-service affecting)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-23