Carrier Access none Disable, Adit 3104 and Adit 3200 1.1, 1.2, 1.3, 1.4, Adit 3500 and MSR 1.1

Configuration - VLAN Mode

port-protocol-filter

Use the VLAN port-protocol-filtercommand to enable VLAN filtering for the port. Note: The vlan-featurecommand, on page 20-7,must be executed before this command.

Syntax: (config-vlan)# port-protocol-filter {disableenable} ethernet

port

Field	Definition
disable	Disable VLAN filtering on defined Ethernet port.
enable	Enable VLAN filtering on defined Ethernet port.
port	Ethernet port in the form {port}.{sub-interface}.
	Adit 3104 and Adit 3200: 1.1, 1.2, 1.3, 1.4, 2.1
	Adit 3500 and MSR: 1.1 and 2.1

Example: (config-vlan)# port-protocol-filter enable ethernet 1.1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

pvid

Use the VLAN pvid command to set the port native VLAN ID, or PVID.

Syntax: (config-vlan)# pvid ethernet port

Field

port

Definition

Ethernet port in the form {port}.{sub-interface}. Adit 3104 and Adit 3200: 1.1, 1.2, 1.3, 1.4, 2.1 Adit 3500 and MSR: 1.1 and 2.1

Example: (config-vlan)# pvid ethernet 1.1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

20-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI