Carrier Access none manual Example config-l2tpc-1# ppp authentication chap

Configuration - L2TPC Mode

ppp authentication

Use the L2TPC ppp authentication command to configure the support of authentication types for the password. To disable PPP authentication, see no ppp authentication command on page 15-18.

Syntax: (config-l2tpc-{n})# ppp authentication {chapms-chap ms-chapv2pap}

Field	Definition
chap	Support Challenge Handshake Authentication (CHAP)
ms-chap	Support Microsoft CHAP (MS-CHAP).
ms-chapv2	Support Microsoft CHAP Version 2 (MS-CHAPv2).
pap	Support an unencrypted password.

Example: (config-l2tpc-1)# ppp authentication chap

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ppp encryption

Use the L2TPC ppp encryption command to configure the PPP encryption. To disable PPP encryption, see no ppp encryption command on page 15-18.

Syntax: (config-l2tpc-{n})# ppp encryption {40-bit128-bit}

Field	Definition
40-bit	Support Encryption (40 bit keys)
128-bit	Support Maximum Strength Encryption (128 bit keys)

Example: (config-l2tpc-1)# ppp encryption 40-bit

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ppp exec-timeout

Use the L2TPC ppp exec-timeoutcommand to set the PPP maximum idle time before hangup.To disable PPP idle time, see no ppp exec-timeoutcommand on page 15-18.

Syntax: (config-l2tpc-{n})# ppp exec-timeout minutes

Field	Definition
minutes	Range is 0 - 99999 minutes.

Example: (config-l2tpc-1)# ppp exec-timeout 150

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-21