Carrier Access none manual Syntax config-int-ser-n# schedule-availability time-range

Configuration - Serial Interface Mode

schedule-availability

Use the Serial Interface schedule-availabilitycommand to apply a schedule rule to this interface. To delete a schedule, see no schedule-availabilitycommand on page 13-20.

Syntax: (config-int-ser-{n})# schedule-availability time-range

schedule-id

Field	Definition
schedule-id	Enter an existing schedule rule name. See time-rangecommand on
	page 4-62to set the schedule-id

Example: (config-int-ser-1)# schedule-availability time-range 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

shutdown

Use the Serial Interface shutdown command to disable the serial interface. To set the serial interface up (In-Service), see no shutdown command on page 13-20.

Syntax: (config-int-ser-{n})# shutdown

Example: (config-int-ser-1)# shutdown

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

sip-alg

Use the Serial Interface sip-algcommand to enable SIP ALG. To disable SIP ALG, see no sip-algcommand on page 13-20.

Syntax: (config-int-ser-{n})# sip-alg enable

Example: (config-int-ser-1)# sip-alg enable

Supported Platforms: Adit 3104, Adit 3500, MSR

13-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI