Carrier Access none manual No host-filter, No ipsec authentication-retries, No ipsec log ike

Global Configuration Mode

Global Configuration Commands

no host-filter

Use the no host-filtercommand to remove a IP host name filter entry. To add a IP host name, see host-filtercommand on page 4-19.

Syntax: (config)# no host-filter name

Field

name

Definition

Name of an existing IP host name to remove.

Example: (config)# no host-filter HostFilter1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ipsec authentication-retries

Use the no ipsec authentication-retriescommand to disable the block-ip feature. To enable block-ip, see the ipsec authentication-retriescommand on page 4-21.

Syntax: (config)# no ipsec authentication-retries

Example: (config)# no ipsec authentication-retries

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ipsec log ike

Use the no ipsec log ike command to disable Internet Key Exchange (IKE) related logs. To enable IKE logging, see ipsec log ike command on page 4-22

Syntax: (config)# no ipsec log ike {auto-keyike-intike-msgmsg-byte msg-enc-decmsg_inpmsg-outppri-keyrej-packet}

Field	Definition
auto-key	Enable verbose automatic keying.
ike-int	Enable verbose IKE IPSec interaction.
ike-msg	Print all IKE message ignoring rate limit.
msg-byte	Enable message’s raw byte option.
msg-enc-dec	Enable message’s encryption and decryption.
msg_inp	Enable message’s input structure.
msg-outp	Enable message’s output structure.
pri-key	Enable verbose private key.
rej-packet	Enable verbose IKE reject packets.

Example: (config)# no ipsec log ike msg-outp

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-40 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI