Carrier Access none manual No vlan, No voice-codec, No voice-port trunk

Global Configuration Mode

Global Configuration Commands

no vlan

Use the no vlan command to clear all VLANs. To enter the VLAN configuration mode, see vlan (global) command on page 4-63.

Syntax: (config)# no vlan

Example: (config)# no vlan

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no voice-codec

Use the no voice-codeccommand to remove a voice codec. To set the voice codecs, see voice-codeccommand on page 4-64.

Syntax: (config)# no voice-codec {g711alawg711ulawg729}

Field	Definition
g711alaw	G.711, 64kbps, u-law
g711ulaw	G.711, 64kbps, A-law
g729	G.729, 8kbps

Example: (config)# no voice-codec g711alaw

Supported Platforms: Adit 3104, Adit 3500, MSR

no voice-port trunk

Use the no voice-port trunk command to disable the Voice Port Trunk. To enter the Voice Port Trunk configuration mode, see voice-port trunk command on page 4-66.

Syntax: (config)# no voice-port trunk port

Field

port

Definition

Trunk port number. Value must be 1.

Example: (config)# no voice-port trunk 1

Supported Platforms: Adit 3500, MSR

4-52 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI