Carrier Access none manual No connection lcc, No connection t1

Configuration - Voice Port Trunk Mode

no commands

no comfort-noise

Use the Voice Port Trunk no comfort-noisecommand to disable comfort noise. To enable remote access, see comfort-noisecommand on page 24-2.

Syntax: (config-vport-trk-{n})# no comfort-noise

Example: (config-vport-trk-1)# no comfort-noise

Supported Platforms: Adit 3500, MSR

no connection lcc

Use the Voice Port Trunk no connection lcc command to remove a Link Cross Connection (LCC). To add an LCC, see the connection lcc command on page 24-2.

Syntax: (config-vport-trk-{n})# no connection lcc number

Field	Definition
number	Enter a current LCC connection. Range = 1-8.

Example: (config-vport-trk-1)# no connection lcc 2

Supported Platforms: MSR

no connection t1

Use the Voice Port Trunk no connection t1 command to remove a T1 connection. To enter the T1 connection configuration mode, see connection t1 command on page 24-2.

Syntax: (config-vport-trk-{n})# no connection t1 port

Field

port

Definition

Enter a current T1 connection. T1 port range 1-4.

Example: (config-vport-trk-1)# no connection t1 2

Supported Platforms: Adit 3500

24-8 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI