Carrier Access none manual Adit 3000 Rel .6 and MSR Card Rel 2.0 CLI 17-19

Configuration - PPTPC Mode

no ppp time-btwn-reconnect

Use the PPTP Client no ppp time-btwn-reconnectcommand to set the time between reconnect attempts to the default setting. To configure the time between reconnect attempts, see ppp time- btwn-reconnectcommand on page 17-22.

Syntax: (config-pptpc-{n})# no ppp time-btwn-reconnect

Example: (config-pptpc-1)# no ppp time-btwn-reconnect

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no ppp username

Use the PPTP Client no ppp username command remove the PPP username. To set a PPP user, see

pppusername command on page 17-22.

Syntax: (config-pptpc-{n})# no ppp username username

Example: (config-pptpc-1)# no ppp username test-user-name

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no schedule-availability

Use the PPTP Client no schedule-availabilitycommand to disable a schedule rule. To add a rule, see schedule-availabilitycommand on page 17-23.

Syntax: (config-pptpc-{n})# no schedule-availability

Example: (config-pptpc-1)# no schedule-availability

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no shutdown

Use the PPTP Client no shutdown command to set the interface up (In-Service).To set the interface down (Out-of-Service), see shutdown command on page 17-23.

Syntax: (config-pptpc-{n})# no shutdown

Example: (config-pptpc-1)# no shutdown

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 17-19