Carrier Access none manual Use the end command to exit the current Configuration mode

Configuration - Voice Port Trunk Mode

echo-cancel

Use the Voice Port Trunk echo-cancelcommand to enable Echo Cancellation on this trunk. To disable Echo Cancellation, see no echo-cancelcommand on page 24-9.

Syntax: (config-vport-trk-{n})# echo-cancel enable

Example: (config-vport-trk-1)# echo-cancel enable

Supported Platforms: Adit 3500, MSR

end

Use the end command to exit the current Configuration mode.

Syntax: (config-vport-trk-{n})# end

Example: (config-vport-trk-1)# end

#

Supported Platforms: Adit 3500, MSR

exit

Use the exit command to close your current connection if you are in the User mode, or Privileged mode. If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you to the next higher level (example: back to Privileged mode from Interface configuration mode).

Syntax: (config-vport-trk-{n})# exit

Example: (config-vport-trk-1)# exit

(config)#

Supported Platforms: Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-5