Carrier Access none manual Syntax config-int-ser-n# ppp restart-timer seconds

Configuration - Serial Interface Mode

ppp restart-timer

Use the Serial Interface ppp restart-timercommand to configure the PPP restart timer.

Syntax: (config-int-ser-{n})# ppp restart-timer seconds

Field	Definition
seconds	Range is 1 - 65535 seconds. Default is 3 seconds.

Example: (config-int-ser-1)# ppp restart-timer 15

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ppp time-btwn-reconnect

Use the Serial Interface ppp time-btwn-reconnectcommand configure the time between reconnect attempts.

Syntax: (config-int-ser-{n})# ppp time-btwn-reconnect seconds

Field	Definition
seconds	Set the interval of time between reconnect attempts.
	Range is 0 - 99999 seconds. Default is 30 seconds.

Example: (config-int-ser-1)# ppp time-btwn-reconnect 15

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ppp username

Use the Serial Interface ppp username command set the PPP Login User Name. To delete a PPP user, see no ppp username command on page 13-20.

Syntax: (config-int-ser-{n})# ppp username username

Field	Definition
username	Enter the Username, with a maximum of 19 characters.

Example: (config-int-ser-1)# ppp username test-user-name

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-23