Carrier Access none manual Date, Enable, End, Example adit 3500 date Wed Jan 12 103751

User Mode

date

Use the date command to display the current date.

Syntax: > date

Example: adit 3500> date

Wed Jan 12 10:37:51 2007

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

enable

Use the enable command (at the User mode prompt) to enter the Privileged mode. Note: Once a correct password has been entered, the prompt changes from ">" to "#".

Syntax: > enable

Example: adit 3500> enable

password: ********

adit 3500#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

end

Use the end command to exit the current Configuration mode. Must be used to mark the end of any configuration file. Note: This command can be entered in any Configuration mode with the same result.

Syntax: > end

Example: Adit 3500> end

Adit 3500 Username:admin

Adit 3500 Password:********

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

2-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI