ADTRAN 1200305L1 Is waiting for an acknowledge, Sent configuration request, Enabled, occurs now

Section 4, User Interface Guide ATLAS 550 System Manual

PACKET MANAGER > PACKET ENDPNTS > STATUS > SIG STATE - PPP

Read security: 5

(Valid only for PPP endpoints.) Indicates the status of the PPP negotiation.The possible states are defined below.

INITIAL	This is the first state of LCP negotiation. If the packet endpoint is
	connected to a physical port in the DEDICATED MAP, this state will
	usually transition to the STARTING state to begin the PPP negotiation.
STARTING	The packet endpoint stays in this state only when the physical line is
	down.
REQ - SENT	The packet endpoint has sent an LCP configuration request to the peer
	and is waiting for an “acknowledge.”
ACK - RECVD	The packet endpoint has received an “acknowledge” from the peer for
	the sent configuration request.
ACK - SENT	The packet endpoint has acknowledged the peer’s configuration request,
	but the peer has not acknowledged us.
OPENED	LCP negotiation on the packet endpoint has finished; authentication, if
	enabled, occurs now.
CLOSING	The packet endpoint has sent the peer a “terminate” request and is
	waiting for the peer’s acknowledgement.
CLOSED	The packet endpoint has received the peer’s acknowledgement to the
	sent terminate request; this is followed by the initial state.
STOPPING	The packet endpoint has received a terminate request from the peer.
STOPPED	The packet endpoint has acknowledged the peer’s terminate request.
NOT CONNECTED	The packet endpoint is not connected to the router in the PACKET CNCTS
	menu.

PACKET MANAGER > PACKET ENDPNTS > STATUS > CURRENT PORT

Read security: 5

Displays the connections for the packet endpoint. The letter U in this field indicates that this packet endpoint is used in the PACKET CNCTS map. The remainder of the field indicates the physical port this packet endpoint is connected to in the DEDICATED MAP. If the port is a channelized interface such as a T1, the DS0 assignment is also provided.

PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE

Write security: 3; Read security: 5

Displays performance information for each packet endpoint including the endpoint name, the protocol used, link stats, and sublink stats.

PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > ENDPNT NAME

Read security: 5

Displays the packet endpoint name as defined in the PACKET ENDPNTS/CONFIG menu (see also Packet

192 © 2002 ADTRAN, Inc. 61200305L1-1F