Section 4, User Interface Guide ATLAS 550 System Manual
142 © 2002 ADTRAN, Inc. 61200305L1-1F

conveyed using the Inband control channel, which must be enabled.

MODULES (USSI-2) > DIAL
Write security: 3; Read security: 5

Dials a USSI port that is configured to ignore DTR.

MODULES (USSI-2) > DIAL > PRT
Read security: 5

Displays the port number. There are 2 available interfaces on the Dual USSI Option Module.

MODULES (USSI-2) > DIAL > MODE
Write security: 3; Read security: 5

Configures the dialing mode. The following options are available:

MODULES (USSI-2) > DIAL > DIAL
Write security: 0; Read security: 0

Signals the USSI port to dial/clear the call.

MODULES (USSI-2) > DIAL > SRC ID
Write security: 3; Read security: 5

Indicates the SOURCE ID of the number to be dialed. Configure this field in the USSI INTERFACE

CONFIGURATION section of the DIAL PLAN.
MODULES (USSI-2) > DIAL > NUMBER
Write security: 3; Read security: 5

Indicates the number to be dialed. Configure this field in the USSI INTERFACE CONFIGURATION section of

the DIAL PLAN.

MODULES (USSI-2) > TEST
Write security: 4; Read security: 5

These options initiate different types of tests and display test results.

SIGNAL RTS V.54
LOOPBACK
511 TEST
ON
SELF
TEST
ACTIVE
NETWORK
TEST
ACTIVE
NO DS0
MAPPED
NETWORK
ALARM
CTS Follows Off Off Off Off Off Off
DCD —— —OffOffOffOff
DSR — Off Off Off Off Off —
— = Do not care
Force On = On under all conditions

PERSISTENT Redial whenever the call is cleared or if the call fails.

ONE TIME Attempt the call only once.