ATLAS 550 System Manual Section 3, Network Turnup Procedure
61200305L1-1F © 2002 ADTRAN, Inc. 55
Instructions for Installing the ATLAS 550 Network and Option Modules
8. MODULE SHIPPING CONTENTS
This section provides shipping content information for all available ATLAS 550 option, network, and
resource modules.
T1/PRI Network Interface Module (P/N 1200307L1)
Shipping Contents
The ADTRAN shipment of the T1/PRI Network Interface Module includes the following items:
• T1/PRI Network Interface Module
• T1/PRI Network Interface Module Quick Start Guide
• One T1 cable (RJ-48C to RJ-48C), ADTRAN P/N 3125M008
• One T1 crossover cable (RJ-48C to RJ-48C), ADTRAN P/N 3125M010
E1/PRA Network Interface Module (P/N 1200308L1)
Shipping Contents
The ADTRAN shipment of the E1/PRA Network Interface Module includes the following items:
• E1/PRA Network Interface Module
• E1/PRA Network Interface Module Quick Start Guide
• RJ-45 to DB-15 adapter, ADTRAN P/N 3196028
Option modules are intended to be serviced by qualified service personnel only.
Instructions for Installing the ATLAS 550 Option Modules
Step Action
1Remove the cover plate from the appropriate option slot of the ATLAS 550 rear panel.
2Slide the Option Module into the option slot until the module is firmly seated against the front of
the chassis.
3Secure the thumbscrews at both edges of the module. Tighten with a screwdriver.
4Connect the cables to the associated device(s).
5Complete installation of remaining modules and unit as specified in the appropriate sections of
this Network Turnup Procedure.