ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 87
SYSTEM CONFIG > SNMP > DS1 TOTAL PERF THRESHOLDS > TOTAL LCV THRSH
Write security: 3; Read security: 5
The DS1 performance monitor Threshold Value for the Total Line Code Violations (LCV) parameter. The
default value is 133,400 for an approximate BER level of 10E-5.
SYSTEM CONFIG > SNMP > ASP ENDPOINT COMMUNITIES
Write security: 0; Read security: 0
Configures the ADLP list used when accepting incoming traps from remote ADTRAN TSU 100 Series or
ISU 512 units. For a trap to be recognized and sent to the network management station (NMS) listed in the
TRAPS DESTINATION field, the remote unit must be listed in the ASP ENDPOINT COMMUNITIES list. The ADLP
ADDRESS and ADLP PASSWORD parameters must be configured.
SYSTEM CONFIG > SNMP > ASP ENDPOINT COMMUNITIES > ADLP ADDRESS
Write security: 0; Read security: 0
Enter the ADLP address (Unit ID) of the remote unit. Only traps containing an ADLP address listed here
will be accepted.
SYSTEM CONFIG > SNMP > ASP ENDPOINT COMMUNITIES > ADLP PASSWORD
Write security: 0; Read security: 0
Enter the ADLP password (Unit Password) of the remote unit. The password will be verified before traps
will be accepted from the remote unit.
SYSTEM CONFIG > SNMP > SNMP/ASP PROXY
Write security: 0; Read security: 0
Enables or disables Get_Request capabilities for remote units. When enabled, this feature allows SNMP
requests to be sent from the network management station (NMS) through the ATLAS 550 to the selected
remote unit. Remote units must be ADTRAN TSU 100 Series or ISU 512 products. All remote units must
be listed in the ASP ENDPOINT COMMUNITIES list.
SYSTEM CONFIG > SNMP > SNMP/ASP POLLING
Write security: 0; Read security: 0
Enables or disables trap polling through the ATLAS 550 to remote ADTRAN TSU 100 Series or ISU 512
units. When enabled, this feature allows the ATLAS 550 to forward any traps received from remote units to
the network management station (NMS) listed in the TRAPS DESTINATION field. The remote unit must be
listed in the ASP ENDPOINT COMMUNITIES for the traps to be forwarded.
SYSTEM CONFIG > EVENT LOGGING
Write security: 3; Read security: 5
Sets the system event severity level threshold for each of the ATLAS 550 system event types. When a
system event occurs, the event is logged if the event’s severity level is equal to or more severe than the
event type’s current threshold setting. See Section 7, System Event Logging, for detailed information on the
system events.