ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 245
DEDICATED MAPS (NXT1 HSSI AND NXT1 HSSI/V.35 MODULES)DEDICATED MAPS (NXT1 HSSI) > CREATE/EDIT MAPS > CONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press <Enter > to activate the submenus.
DEDICATED MAPS (NXT1 HSSI) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG
Write security: 3; Read security: 5
Specifies the configuration for the TO/FROM connection. The following selection applies to the NxT1 HSSI
and NxT1 HSSI/V.35 Option Modules when connected to a port on a T1 Module. This is the only valid
application for the NxT1 HSSI and NxT1 HSSI/V.35 Option Modules.
PORTS AVAILABLE
Write security: 3; Read security: 5
Indicates which ports of the module are assigned. Port assignment is based on the following items:
DIGIT 0-9 This DS0 is available. The digit that displays in this field represents the
last digit of the DS0 number.
*This DS0 has been requested for this connection, but the DS0 is not yet
activated for this port.
!This DS0 is used by this port in this connection and is currently
activated.
SThis DS0 is used in the switched DIAL PLAN.
SThis DS0 is used in the switched DIAL PLAN and conflicts with this
connection.
NThis DS0 is already used in this DEDICATED MAP.
NThis DS0 is already used in this DEDICATED MAP and conflicts with this
connection.
DS0 SELECTION
Write security: 3; Read security: 5
Defines DS0s for the T1 port. Use this field to define the DS0s for this connection.
For the NxT1 HSSI and NxT1 HSSI/V.35 Option Modules, any entry in the DS0 selection
field that is less than 24 DS0s is disregarded. The NxT1 HSSI and NxT1 HSSI/V.35 Option
Modules requires the use of all 24 DS0s on a T1 for proper operation.