ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 195
PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > SUBLINK STATS - FRAME RELAY
Write security: 3; Read security: 5
Displays frame relay performance statistics for supported packet endpoint sublinks. These statistic fields
reflect the total count since cleared. These settings are not applicable for PPP or TBOP.
NAME
Write security: 3; Read security: 5
Alphanumeric characters (up to 16 characters) to create a user-defined name for the sublink (PVC).
DLCI
Write security: 3; Read security: 5
Local address for each PVC as assigned by the carrier.
STATE
Write security: 3; Read security: 5
Indicates if this particular sublink (PVC) has been defined as active by a full status poll, and also
indicates if the PVC is in backup mode.
ACTIVE PVC is active.
INACTIVE PVC is inactive.
ACTIVE/BU PVC is active, but in backup mode.
INACTIVE/BU PVC is inactive and in backup mode.
TX PCKTS
Write security: 3; Read security: 5
Total number of frame relay user data packets transmitted over this PVC.
RX PCKTS
Write security: 3; Read security: 5
Total number of frame relay user data packets received over this PVC.
STATISTICS
Write security: 3; Read security: 5
Provides additional information, as follows, on the individual sublink:
RESET COUNTERS
Write security: 3; Read security: 5
Resets all sublink counters.
FECN COUNT
Write security: 3; Read security: 5
Total number of FECN bits received on this PVC.