ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 185
possible states are defined below.
MODULES (ADPCM-32) > STATISTIC S
Write security: 5; Read security: 5
These options initiate different types of tests and display test results.
MODULES (ADPCM-32) > STATISTIC S > DEVICE
Read security: 5
Indicates the resource number of the packet voice device listed. On the ATLAS 550, packet voice devices
are numbered 1-24.
MODULES (ADPCM-32) > STATISTIC S > USAGE TIME
Read security: 5
Measures the total elapsed time that a packet voice device has the status BUSY. The time is expressed with
millisecond precision. Available packet voice devices are assigned new connections using a round-robin
technique where all other available packet voice devices must be used before a given device is assigned a
new connection. This scheme tends to use all packet voice devices evenly. If a given device shows
significantly less elapsed usage time than other packet voice devices on the same ATLAS 550, that device
may be faulty.
MODULES (ADPCM-32) > STATISTIC S > ATLAS FRMS
Read security: 5
(ATLAS Frames) Counts every frame that the ATLAS 550 sends to or receives from the packet voice
device. This count indicates activity but does not indicate the actual amount of frame relay data exchanged.
The total number of frames handled by the packet voice device is given by the following equation:
See the ATLAS DROP definition below for a description of the term:
DEFERRED Devices which fail built-in testing are automatically marked as
DEFERRED, indicating that the ATLAS 550 declines to use the device.
AVAILABLE The device is properly functioning and can be used when required. The
ATLAS 550 automatically marks devices that pass built-in testing as
AVAILABLE.
DISABLED Marking a device as DISABLED prevents the ATLAS 550 from
attempting to use it. You can mark a device currently in use as disabled
without disturbing the connection, but the device will not be eligible for
use in future calls until you re-mark it as AVAILABLE. This is helpful if
you suspect that a particular device is malfunctioning and do not want
any calls routed to it.
Frames ATLAS()Total FramesATLAS Frames ATLAS()Dropped
+=
Frames ATLAS()Dropped