ADTRAN 1200305L1 Setting Up the Atlas 550 to use the Syslog, Setting Up the Syslog Host

Section 5, DLP-013 ATLAS 550 System Manual

DLP-013

Setting Up the ATLAS 550 to use the Syslog

1.Login to the system with maximum rights (details for logging in are in DLP-002). Once you have logged into the ATLAS 550, go to SYSTEM CONFIG/SYSLOG SETUP. Set the options as follows:

•TRANSMISSION: Enabled

•HOST IP ADDRESS: Enter the IP address of the PC where the Syslog host resides

•HOST FACILITY: Specify the facility destination of log events; Options are LOCAL0 to LOCAL7

Setting Up the Syslog Host

1.On your PC, go to START/PROGRAMS/ADTRAN UTILITIES/SYSLOG. When the Syslog window opens, you will see LOCAL0 through LOCAL7 listed on the left. This should correspond with the HOST FACILITY specified in the ATLAS 550. The Syslog program must be open on your PC in order for it to record ATLAS 550 information. The Syslog files can be viewed through the Syslog window, and they are also available under the ADTRAN Utilities Folder named LOCALX.TXT, where X can equal 0 through 7. You can also view the LOCALX.TXT file by clicking on EDIT LOG.

Any event logged in the ATLAS 550 event log (SYSTEM STATUS/EVENT LOG) should also appear in the Syslog.

352 © 2002 ADTRAN, Inc. 61200305L1-1F