ATLAS 550 System Manual

Section 4, User Interface Guide

 

 

ROUTER > IP > GLOBAL > DEFAULT METRIC

Write security: 2; Read security: 2

Defines the default gateway metric. Enter the default gateway metric by pressing <Enter> and entering a decimal number.

ROUTER > IP > GLOBAL > DEFAULT GATEWAY COST

Write security: 2; Read security: 2

Defines the default gateway cost. Enter the default gateway metric by pressing <Enter> and entering a decimal number.

ROUTER > IP > PING

Write security: 2; Read security: 2

Allows you to send pings (ICMP requests) to devices accessible via the network.

Only one ping session can be active at a time.

ROUTER > IP > PING > IP ADDRESS

Write security: 2; Read security: 2

Specifies the IP address to ping.

ROUTER > IP > PING > COUNT

Write security: 2; Read security: 2

Specifies the number of pings to send. The maximum value is 99.

ROUTER > IP > PING > SIZE

Write security: 2; Read security: 2

Specifies the size in bytes of the data portion of the ping request. The default value is 64 bytes, and the maximum size is 1024 bytes.

ROUTER > IP > PING > TIMEOUT

Write security: 2; Read security: 2

Specifies the time in milliseconds to wait for the ping reply before timing out. The default timeout is three seconds, and the maximum timeout value is ten seconds.

ROUTER > IP > PING > ROUND TRIP MIN

Read security: 2

Displays the minimum round trip time of the ping request/reply of the current set of pings.

61200305L1-1F

© 2002 ADTRAN, Inc.

225

Page 225
Image 225
ADTRAN 1200305L1 system manual Router IP Ping, Specifies the number of pings to send. The maximum value is