ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 89
SYSTEM CONFIG > ACCESS PASSWORDS > LABEL
Write security: 0; Read security: 0
Defines a username. The defined username is for labeling purposes only; it is not used for access into the
system.
SYSTEM CONFIG > ACCESS PASSWORDS > PASSWORD
Write security: 0; Read security: 0
Allows you to change the password (the default password is “password”). The current password displays
as a series of asterisks (********). The password can contain up to a combination of 12 case-sensitive
alphanumeric characters, spaces, or special characters.
SYSTEM CONFIG > ACCESS PASSWORDS > ACCESS RIGHTS
Write security: 0; Read security: 0
Defines the password level for the corresponding label. You can select from six different password levels
(see Table 1 on page 69).
SYSTEM CONFIG > ACCESS PASSWORDS > ACTIVE
Read security: 0
Displays the number of users currently logged into the system (listed for each configured LABEL).
SYSTEM CONFIG > LICENSES
Write security: 0; Read security: 0
(Not currently used.) Provides menus to enable the optional ATLAS 550 feature upgrades.
SYSTEM CONFIG > BONDING CONFIG
Write security: 3; Read security: 5
Displays the configuration submenus available for the BONDing Module. This configuration is shared
among all BONDing Modules.
SYSTEM CONFIG > BONDING CONFIG > TXINIT TIMER
Write security: 3; Read security: 5
Specifies the length of time the originating endpoint attempts to detect the BONDING negotiation pattern
from the answering endpoint before deciding the BONDING call has failed.
FEATURE Names the ATLAS 550 feature upgrade.
LICENSE KEY Displays the license key of the feature upgrade.
SERIAL NUMBER Displays the serial number of the feature upgrade.
LIC CNT Displays the number of instances of the feature that the license
provides. This field may not be applicable for a given feature -- if it is
not, this field is blank.
STATUS Reflects the status, PERMANENT or TEMPORARY, of the feature upgrade
license key.