SAVING THE CURRENT CONFIGURATION USING XMODEM

Introduction

The ATLAS 550 supports configuration transfers from the unit using a VT100 terminal or terminal emulator (with XMODEM) and the CONTROL IN or CRAFT interface. This DLP provides the steps for a successful configuration transfer using the CONTROL IN or CRAFT port and XMODEM.

Tools and Materials Required

VT100 terminal or PC with VT100 terminal emulation software

XMODEM software

To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.

Electronic modules can be damaged by static electrical discharge. Before handling modules, wear an antistatic discharge wrist strap to prevent damage to electronic components. Place modules in antistatic packing material when transporting or storing. When working on modules, always place them on an approved antistatic mat that is electrically grounded.

61200305L1-1F

© 2002 ADTRAN, Inc.

343

Page 343
Image 343
ADTRAN 1200305L1 system manual Saving the Current Configuration Using Xmodem