ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 175
MODULES (NXT1HSSI) > HSSI MENUS > TEST > REMOTE LPBK (HSSI)
Write security: 4; Read security: 5
Transmits a loopback request to the remote DTE interface. The following local loopbacks are available:
MODULES MENU (ETHERNET SWITCH MODULE)
The ATLAS 550 system controller automatically detects the presence of the Ethernet Switch Module when
it is installed in the system (listed as ENET-8). To see the menus for the Ethernet Switch Module via the
terminal menu, use the arrow keys to scroll to the MODULES menu and press <Enter> to access the module
choices. Refer to the Ethernet Switch Module Quick Start Guide for a menu tree containing a complete
listing of menus.
MODULES (ENET-8) > INFO
Read security: 5
Provides information about the module part number, serial number and assembly revision.
MODULES (ENET-8) > INFO > PART NUMBER
Read security: 5
Displays the part number of the module.
MODULES (ENET-8) > INFO > SERIAL NUMBER
Read security: 5
Displays the serial number of the module.
MODULES (ENET-8) > INFO > ASSEMBLY REVISION
Read security: 5
Displays the assembly revision of the installed module.
MODULES (ENET-8) > STATUS
Read security: 5
Displays the status of each Ethernet port located on the Ethernet Switch Option Module.
MODULES (ENET-8) > STATUS > PORT
Read security: 5
Indicates the operating port number. There are eight available Ethernet interfaces on the Ethernet Switch
Option Module.
MODULES (ENET-8) > STATUS > LINK STATUS
Read security: 5
Indicates whether there is an active Ethernet link connected to the interface. An active connection is
indicated with a LINK UP status message. LINK DOWN indicates there is no active Ethernet connection on the
EXTERNAL DCE Transmits a loopback request to the remote DTE interface. All data
transmitted out the HSSI (or HSSI/V.35) DTE interface will be echoed back
by the remote DCE equipment.