ADTRAN 1200305L1 DIAL PLAN, DIAL PLAN > NETWORK TERM, DIAL PLAN > NETWORK TERM > SLOT/SVC

ATLAS 550 System Manual Section 4, User Interface Guide
61200305L1-1F © 2002 ADTRAN, Inc. 253
DIAL PLAN
The DIAL PLAN submenus set global ATLAS 550 switch parameters as well as individual parameters for
each ATLAS 550 port handling a switched call (see Figure 18). The individual ports are separated into two
port types: network and user. Network ports terminate a connection from the network. User ports terminate
incoming calls and, in turn may be connected to user equipment.
Figure 18. Dial Plan Menu
DIAL PLAN > NETWORK TERM
Write security: 3; Read security: 5
This menu allows the user to define option parameters for ports which terminate a connection from the
network.
DIAL PLAN > NETWORK TERM > SLOT/SVC
Write security: 3; Read security: 5
Selects the ATLAS 550 slot or service that terminates a network connection.
In applications where two ATLAS 550 units are used in a point-to-point configuration, a
port in the ATLAS 550 at one end would act as the network (USER TERM), while the ATLAS
550 at the opposite end would be terminating a network connection (NETWORK TERM).