ADTRAN 1200305L1 system manual Packet Manager Packet Endpnts Config Config Sdlc

Section 4, User Interface Guide ATLAS 550 System Manual

MAX CONFIG

Write security: 3; Read security: 5

This value is the number of unanswered configuration requests that should be transmitted before giving up on negotiation. The default value is 10.

MAX TIMER

Write security: 3; Read security: 5

This value is the number of seconds to wait between unanswered configuration requests. The default value is 2 seconds.

MAX FAILURE

Write security: 3; Read security: 5

Due to the nature of PPP, configuration options may not be agreed upon between two PPP peers. This value is the number of configuration-NAKs that should occur before an option is configuration-rejected. This allows a connection to succeed that might otherwise fail. The default value is 5.

KEEPALIVE

Write security: 3; Read security: 5

Configures the ATLAS 550 to send keepalive frames on PPP connections that are not currently in use for data.

PACKET MANAGER > PACKET ENDPNTS > CONFIG > CONFIG - SDLC

Write security: 3; Read security: 5

Contains the configuration parameters for the SDLC packet endpoints.

Extreme caution should be used when changing the following parameters from their default state.

POLL RESPONSE TIMEOUT

Write security: 3; Read security: 5

Sets the number of seconds the ATLAS 550 waits for a poll response before marking the poll as unanswered.

MINIMUM POLL TIMER

Write security: 3; Read security: 5

Sets the number of seconds the ATLAS 550 waits between polls. The timer is started when the first poll is sent and will be restarted when the next poll is sent.

200 © 2002 ADTRAN, Inc. 61200305L1-1F