ADTRAN 1200305L1 system manual Connecting the Alarm Contacts

CONNECTING THE ALARM CONTACTS

Introduction

This DLP explains how to connect the alarm contacts on the ATLAS 550.

Prerequisite Procedures

Before making alarm connections, the unit should be mounted in its permanent location.

Tools and Materials Required

•Wire strippers

•Small, straight slot screwdriver

•22 or 24 AWG 2-conductor twisted pair cross connect wire

To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.

Electronic modules can be damaged by static electrical discharge. Before handling modules, wear an antistatic discharge wrist strap to prevent damage to electronic components. Place modules in antistatic packing material when transporting or storing. When working on modules, always place them on an approved antistatic mat that is electrically grounded.

61200305L1-1F © 2002 ADTRAN, Inc. 355