ADTRAN 1200305L1 system manual Atlas 550 System Manual DLP-004 Telnet to the Atlas

ATLAS 550 System Manual Section 5, DLP-004

3.Telnet to the ATLAS 550.

From the same computer used in the previous step, Telnet to the ATLAS 550 and verify that the Telnet session is properly opened (see DLP-002for logging in to a system and establishing a Telnet session). Once the Telnet session is established, press <CTRL+L> to logout and close the session.

Refer to the documentation of the computer system if you are unsure how to perform a Telnet. Most computers running a networked version of Microsoft Windows™ or UNIX allow a Telnet to be performed by typing telnet <IP Address> at a command line prompt. Telnet is a utility common on many local area networks that allows remote access to another computer or piece of equipment.

Follow-up Procedures

Once this procedure is complete, return to the procedure which referred you to this DLP and continue with the tasks indicated there.

61200305L1-1F © 2002 ADTRAN, Inc. 327